#!/bin/sh

#-------------------------------------------------------------

  MDL="${HOME}/hysplit4"
  MAP="${MDL}/graphics/arlmap"
  MET="${HOME}/Tutorial/japan"

  OUT="."
  cd $OUT

  if [ ! -f ASCDATA.CFG ]; then
     echo "-90.0  -180.0"     >ASCDATA.CFG
     echo "1.0     1.0"      >>ASCDATA.CFG
     echo "180     360"      >>ASCDATA.CFG
     echo "2"                >>ASCDATA.CFG
     echo "0.2"              >>ASCDATA.CFG
     echo "'$MDL/bdyfiles/'" >>ASCDATA.CFG
  fi
  echo "### $0 ###"

#--------------------------------------------------------------

  syr=11
  smo=03
  sda=21
  shr=12
     
  olat=11.0
  olon=-84.0
  lvl1=10.0
        
  run=12
  ztop=10000.0
  data=gdas11-22.bin

#----------------------------------------------------------

  echo "$syr $smo $sda $shr    " >CONTROL
  echo "1                      ">>CONTROL
  echo "$olat $olon $lvl1      ">>CONTROL
  echo "$run                   ">>CONTROL
  echo "0                      ">>CONTROL
  echo "$ztop                  ">>CONTROL
  echo "1                      ">>CONTROL
  echo "$MET/                  ">>CONTROL
  echo "$data                  ">>CONTROL
  echo "1                      ">>CONTROL
  echo "TEST                   ">>CONTROL
  echo "1.0                    ">>CONTROL
  echo "12.0                   ">>CONTROL
  echo "00 00 00 00 00         ">>CONTROL
  echo "1                      ">>CONTROL
  echo "0.0 0.0                ">>CONTROL
  echo "0.05 0.05              ">>CONTROL
  echo "15.0 25.0              ">>CONTROL
  echo "$OUT/                  ">>CONTROL
  echo "cdump                  ">>CONTROL
  echo "1                      ">>CONTROL
  echo "100                    ">>CONTROL
  echo "00 00 00 00 00         ">>CONTROL
  echo "00 00 00 00 00         ">>CONTROL
  echo "00 12 00               ">>CONTROL
  echo "1                      ">>CONTROL
  echo "0.0 0.0 0.0            ">>CONTROL
  echo "0.0 0.0 0.0 0.0 0.0    ">>CONTROL
  echo "0.0 0.0 0.0            ">>CONTROL
  echo "0.0                    ">>CONTROL
  echo "0.0                    ">>CONTROL

#----------------------------------------------------------

  echo "&SETUP "                        >SETUP.CFG
  echo "ndump = 1, "                   >>SETUP.CFG
  echo "ncycl = 1, "                   >>SETUP.CFG
  echo "/ "                            >>SETUP.CFG

  ${MDL}/exec/hycs_std  
  ${MDL}/exec/parxplot -iPARDUMP -j${MAP} -k1 -z90 -oparxplot_none 

#----------------------------------------------------------

  echo "&SETUP "                        >SETUP.CFG
  echo "ndump = 1, "                   >>SETUP.CFG
  echo "ncycl = 1, "                   >>SETUP.CFG
  echo "capemin = 500, "               >>SETUP.CFG
  echo "/ "                            >>SETUP.CFG

  ${MDL}/exec/hycs_std  
  ${MDL}/exec/parxplot -iPARDUMP -j${MAP} -k1 -z90 -oparxplot_cape