#!/bin/sh

#-------------------------------------------------------------

  MDL="${HOME}/hysplit4"
  OUT="${MDL}/working"
  MET="${HOME}/Tutorial/captex"
  cd $OUT

  if [ ! -f ASCDATA.CFG ]; then
     echo "-90.0  -180.0"     >ASCDATA.CFG
     echo "1.0     1.0"      >>ASCDATA.CFG
     echo "180     360"      >>ASCDATA.CFG
     echo "2"                >>ASCDATA.CFG
     echo "0.2"              >>ASCDATA.CFG
     echo "'$MDL/bdyfiles/'" >>ASCDATA.CFG
  fi
  echo "### $0 ###"

#--------------------------------------------------------------

  syr=83
  smo=09
  sda=25
  shr=17 
     
  olat=39.90
  olon=-84.22
  lvl1=10.0
        
  run=25
  ztop=10000.0
  data="captex2_narr.bin"

#----------------------------------------------------------

  echo "$syr $smo $sda $shr    " >CONTROL1
  echo "1                      ">>CONTROL1
  echo "$olat $olon $lvl1      ">>CONTROL1
  echo "$run                   ">>CONTROL1
  echo "0                      ">>CONTROL1
  echo "$ztop                  ">>CONTROL1
  echo "1                      ">>CONTROL1
  echo "$MET/                  ">>CONTROL1
  echo "$data                  ">>CONTROL1
  echo "1                      ">>CONTROL1
  echo "PMCH                   ">>CONTROL1
  echo "67000.0                ">>CONTROL1
  echo "3.0                    ">>CONTROL1
  echo "00 00 00 00 00         ">>CONTROL1
  echo "1                      ">>CONTROL1
  echo "42.0 -78.0             ">>CONTROL1
  echo "0.25 0.25              ">>CONTROL1
  echo "15.0 25.0              ">>CONTROL1
  echo "$OUT/                  ">>CONTROL1
  echo "hysplit2.bin           ">>CONTROL1

  cp CONTROL1 CONTROL

  echo "1                      ">>CONTROL 
  echo "100                    ">>CONTROL 
  echo "83 09 25 18 00         ">>CONTROL  
  echo "83 09 28 15 00         ">>CONTROL 
  echo "00 03 00               ">>CONTROL 
  echo "1                      ">>CONTROL 
  echo "0.0 0.0 0.0            ">>CONTROL 
  echo "0.0 0.0 0.0 0.0 0.0    ">>CONTROL 
  echo "0.0 0.0 0.0            ">>CONTROL 
  echo "0.0                    ">>CONTROL 
  echo "0.0                    ">>CONTROL 

#----------------------------------------------------------

  echo "&SETUP              "  >SETUP.CFG
  echo "numpar=20000,       " >>SETUP.CFG
  echo "maxpar=100000,      " >>SETUP.CFG
  echo "/                   " >>SETUP.CFG

  rm -f hysplit2.bin
  ${MDL}/exec/hycs_std    
  mv MESSAGE MESSAGE_nodep.txt

  echo "'TITLE&','### $0 ### no deposition&'"  >LABELS.CFG
  ${MDL}/exec/concplot -ihysplit2.bin -oplot_nodep -j${MDL}/graphics/arlmap -z80 \
                       -x1.0E+12 -upg 
  gs plot_nodep.ps
  echo "Enter to continue ..."; read x

#----------------------------------------------------------

  cp CONTROL1 CONTROL
  echo "2                      ">>CONTROL 
  echo "0 100                  ">>CONTROL 
  echo "83 09 25 18 00         ">>CONTROL  
  echo "83 09 28 15 00         ">>CONTROL 
  echo "00 03 00               ">>CONTROL 
  echo "1                      ">>CONTROL 
  echo "0.0 0.0 0.0            ">>CONTROL 
  echo "0.01 0.0 0.0 0.0 0.0   ">>CONTROL 
  echo "0.0 0.0 0.0            ">>CONTROL 
  echo "0.0                    ">>CONTROL 
  echo "0.0                    ">>CONTROL 

  rm -f hysplit2.bin
  ${MDL}/exec/hycs_std    
  mv MESSAGE MESSAGE_drygas.txt

  echo "'TITLE&','### $0 ### 1 cm/s deposition&'"  >LABELS.CFG
  ${MDL}/exec/concplot -ihysplit2.bin -oplot_drygas -j${MDL}/graphics/arlmap -z80 \
                       -x1.0E+12 -y1.0E+12 -upg -b0 -t100 -r3 
  gs plot_drygas.ps
  echo "Enter to continue ..."; read x

  rm -f LABELS.CFG
  tail -n 26 MESSAGE_nodep.txt
  tail -n 26 MESSAGE_drygas.txt