#!/bin/sh

#-------------------------------------------------------------

  MDL="${HOME}/hysplit4"
  OUT="${MDL}/working"
  MET="${HOME}/Tutorial/captex"
  cd $OUT

  if [ ! -f ASCDATA.CFG ]; then
     echo "-90.0  -180.0"     >ASCDATA.CFG
     echo "1.0     1.0"      >>ASCDATA.CFG
     echo "180     360"      >>ASCDATA.CFG
     echo "2"                >>ASCDATA.CFG
     echo "0.2"              >>ASCDATA.CFG
     echo "'$MDL/bdyfiles/'" >>ASCDATA.CFG
  fi
  echo "### $0 ###"

#--------------------------------------------------------------

  syr=83
  smo=09
  sda=25
  shr=17 
     
  olat=39.90
  olon=-84.22
  lvl1=10.0  
        
  run=52
  ztop=10000.0
  data="captex2_narr.bin"

#----------------------------------------------------------

  echo "$syr $smo $sda $shr    " >CONTROL
  echo "1                      ">>CONTROL
  echo "$olat $olon $lvl1      ">>CONTROL
  echo "$run                   ">>CONTROL
  echo "0                      ">>CONTROL
  echo "$ztop                  ">>CONTROL
  echo "1                      ">>CONTROL
  echo "$MET/                  ">>CONTROL
  echo "$data                  ">>CONTROL
  echo "1                      ">>CONTROL
  echo "PMCH                   ">>CONTROL
  echo "67000.0                ">>CONTROL
  echo "3.0                    ">>CONTROL
  echo "00 00 00 00 00         ">>CONTROL
  echo "1                      ">>CONTROL
  echo "42.0 -78.0             ">>CONTROL
  echo "0.25 0.25              ">>CONTROL
  echo "15.0 25.0              ">>CONTROL
  echo "$OUT/                  ">>CONTROL
  echo "ensphys                ">>CONTROL
  echo "1                      ">>CONTROL
  echo "100                    ">>CONTROL
  echo "83 09 26 06 00         ">>CONTROL
  echo "83 09 28 15 00         ">>CONTROL
  echo "00 03 00               ">>CONTROL
  echo "1                      ">>CONTROL
  echo "0.0 0.0 0.0            ">>CONTROL
  echo "0.0 0.0 0.0 0.0 0.0    ">>CONTROL
  echo "0.0 0.0 0.0            ">>CONTROL
  echo "0.0                    ">>CONTROL
  echo "0.0                    ">>CONTROL

#----------------------------------------------------------

  rm -f ensphys.???

  for mem in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20; do
      MEM=`printf %3.3d $mem`

                              echo "&SETUP          "  >SETUP.CFG 
                              echo "numpar=2500,    " >>SETUP.CFG 
      if [ $mem == 1 ];  then echo "initd=0,        " >>SETUP.CFG;fi 
      if [ $mem == 2 ];  then echo "initd=3,        " >>SETUP.CFG;fi 
      if [ $mem == 3 ];  then echo "initd=4,        " >>SETUP.CFG;fi 
      if [ $mem == 4 ];  then 
                              echo "initd=4,        " >>SETUP.CFG
                              echo "kpuff=1,        " >>SETUP.CFG;fi 
      if [ $mem == 5 ];  then echo "kmixd=1,        " >>SETUP.CFG;fi 
      if [ $mem == 6 ];  then echo "kmixd=2,        " >>SETUP.CFG;fi 
      if [ $mem == 7 ];  then echo "kmixd=1500      " >>SETUP.CFG;fi 
      if [ $mem == 8 ];  then echo "kmix0=50,       " >>SETUP.CFG;fi 
      if [ $mem == 9 ];  then echo "kzmix=1,        " >>SETUP.CFG;fi 
      if [ $mem == 10 ]; then 
                              echo "kzmix=2,        " >>SETUP.CFG
                              echo "tvmix=0.5,      " >>SETUP.CFG;fi 
      if [ $mem == 11 ]; then 
                              echo "kzmix=2,        " >>SETUP.CFG
                              echo "tvmix=2.0,      " >>SETUP.CFG;fi 
      if [ $mem == 12 ]; then echo "kdef=1,         " >>SETUP.CFG;fi 
      if [ $mem == 13 ]; then echo "kbls=2,         " >>SETUP.CFG;fi 
      if [ $mem == 14 ]; then echo "kblt=1,         " >>SETUP.CFG;fi 
      if [ $mem == 15 ]; then echo "kblt=3,         " >>SETUP.CFG;fi 
      if [ $mem == 16 ]; then 
                              echo "kblt=3,         " >>SETUP.CFG
                              echo "tkern=0.1,      " >>SETUP.CFG;fi 
      if [ $mem == 17 ]; then echo "vscales=5.0,    " >>SETUP.CFG;fi 
      if [ $mem == 18 ]; then echo "vscaleu=1000.0, " >>SETUP.CFG;fi 
      if [ $mem == 19 ]; then echo "hscale=5400.0,  " >>SETUP.CFG;fi 
      if [ $mem == 20 ]; then echo "hscale=21600.0, " >>SETUP.CFG;fi 
      echo "/" >>SETUP.CFG

      echo "Starting member: $MEM"
      ${MDL}/exec/hycs_std 
      mv ensphys ensphys.$MEM
  done

#----------------------------------------------------------

${MDL}/exec/conprob -bensphys -t1 -p1 -z1

echo "'TITLE&','### $0 ###&'"            >LABELS.CFG
echo "'UNITS&',' g&'"                   >>LABELS.CFG
echo "'MAPID&','Air Concentration&'"    >>LABELS.CFG

${MDL}/exec/concplot -m0 -k1 -z80 -j${MDL}/graphics/arlmap -iprob90
gs concplot.ps
rm -f LABELS.CFG
echo "Enter to continue ..."; read x

${MDL}/exec/boxplots -n10 -x-78.80 -y42.25
gs boxplots.ps
echo "Enter to continue ..."; read x

${MDL}/exec/ensplots -n10 -bensphys -x-78.80 -y42.25
gs ensplots.ps