#!/bin/sh

#-------------------------------------------------------------

  MDL="${HOME}/hysplit"
  OUT="${MDL}/working"
  MET="${HOME}/Tutorial/captex"
  cd $OUT

  if [ ! -f ASCDATA.CFG ]; then
     echo "-90.0  -180.0"     >ASCDATA.CFG
     echo "1.0     1.0"      >>ASCDATA.CFG
     echo "180     360"      >>ASCDATA.CFG
     echo "2"                >>ASCDATA.CFG
     echo "0.2"              >>ASCDATA.CFG
     echo "'$MDL/bdyfiles/'" >>ASCDATA.CFG
  fi
  echo "### $0 ###"

#--------------------------------------------------------------

  syr=83
  smo=09
  sda=25
  shr=17 
     
  olat=39.90
  olon=-84.22
  lvl1=10.0
        
  run=19
  ztop=10000.0
  data="captex2_wrf27uw.bin"

#----------------------------------------------------------

  echo "$syr $smo $sda $shr    " >CONTROL
  echo "3                      ">>CONTROL
  echo "38.0 -85.0 $lvl1       ">>CONTROL
  echo "45.0 -78.0 $lvl1       ">>CONTROL
  echo "38.5 -84.5 $lvl1       ">>CONTROL
  echo "$run                   ">>CONTROL
  echo "0                      ">>CONTROL
  echo "$ztop                  ">>CONTROL
  echo "1                      ">>CONTROL
  echo "$MET/                  ">>CONTROL
  echo "$data                  ">>CONTROL
  echo "1                      ">>CONTROL
  echo "PMCH                   ">>CONTROL
  echo "0.3333333              ">>CONTROL
  echo "3.0                    ">>CONTROL
  echo "00 00 00 00 00         ">>CONTROL
  echo "1                      ">>CONTROL
  echo "42.0 -78.0             ">>CONTROL
  echo "0.25 0.25              ">>CONTROL
  echo "15.0 25.0              ">>CONTROL
  echo "$OUT/                  ">>CONTROL
  echo "hysplit2.bin           ">>CONTROL
  echo "1                      ">>CONTROL
  echo "100                    ">>CONTROL
  echo "83 09 26 09 00         ">>CONTROL
  echo "83 09 28 15 00         ">>CONTROL
  echo "00 03 00               ">>CONTROL
  echo "1                      ">>CONTROL
  echo "0.0 0.0 0.0            ">>CONTROL
  echo "0.0 0.0 0.0 0.0 0.0    ">>CONTROL
  echo "0.0 0.0 0.0            ">>CONTROL
  echo "0.0                    ">>CONTROL
  echo "0.0                    ">>CONTROL

  echo "&SETUP              "  >SETUP.CFG
  echo "ichem=1,            " >>SETUP.CFG
  echo "numpar=50000,       " >>SETUP.CFG
  echo "maxpar=100000,      " >>SETUP.CFG
  echo "/                   " >>SETUP.CFG

#----------------------------------------------------------

  ${MDL}/exec/latlon  
  ${MDL}/exec/hycs_std

#----------------------------------------------------------

  ${MDL}/exec/matrix -ihysplit2.bin -oSRM_fwrd.bin -y39.9 -x-84.22 -ms
  echo "'TITLE&','### $0 ### contributions from source&'"  >LABELS.CFG
  echo "'MAPID&','Air Concentration &'" >>LABELS.CFG
  ${MDL}/exec/concplot -k1 -z80 -j${MDL}/graphics/arlmap -iSRM_fwrd.bin
  if [[ "$OSTYPE" == "darwin"* ]]; then
     open concplot.ps    
  else
     gs concplot.ps   
  fi
  echo "Enter to continue ..."; read x

  ${MDL}/exec/matrix -ihysplit2.bin -oSRM_back.bin -y41.3 -x-82.22 -mr
  echo "'TITLE&','### $0 ### sources contributing to receptor&'"  >LABELS.CFG
  echo "'MAPID&',' Values &'" >>LABELS.CFG
  ${MDL}/exec/concplot -k1 -z80 -j${MDL}/graphics/arlmap -iSRM_back.bin
  if [[ "$OSTYPE" == "darwin"* ]]; then
     open concplot.ps    
  else
     gs concplot.ps   
  fi